laguna MT01002, Manual, Page: 11 / 49

Where to locate your machine
Before you remove your machine from the pallet select the area where you
will use your machine. There are no hard and fast rules for its location, but
below are a few guidelines.
1.
Adequate lighting. The better the lighting the more accurate and safely
you will be able to work.
2. Solid floor. You should select a solid flat floor, preferably concrete or
something similar.
3. Close to power source and dust collection.
4. Allow an area for the storage of blanks and finished jobs.
Unpacking your machine
To unpack your machine you will need tin snips, knife and a wrench.
1.
Using the tin snips cut the banding that is securing the packing box [If
fitted]. WARNING: EXTREME CAUTION MUST BE USED BECAUSE
THE BANDING WILL SPRING AND COULD CAUSE INJURY.
2. Dismantle the box or remove the row of screws around the base of the
box and lift the box off the pallet. You will need two people to lift the
box off the pallet. Using the knife cut the plastic wrap. The parts and
accessories that were ordered are in the box.
3. Remove the base mounting bolts that secure the machine to the box.
4. It is recommended that the machine be removed from the pallet by
lifting it with a hoist or forklift. Remove the pallet and lower to the
floor. The machine can be lifted using a fork-lift truck / "SLING" with a
minimum lifting capability of 2000 Kg [4400lb]
Note: If you have any doubt about the described procedure, seek
professional assistance. Do not attempt any procedure that you feel is unsafe
or that you do not have the physical capability of achieving.
10