laguna iFlux 10 Elite, Manual

Page: 8 / 32

10HP Bag Filter Dust Collector Manual
8
FAILURE TO FOLLOW THESE RULES MAY RESULT
IN SERIOUS INJURY.
ADDITIONAL SAFETY FOR DUST COLLECTORS
Intended use. This dust collector is only intended for collecting wood dust
and chips from woodworking machines. Do not use this dust collector to
collect metal, dirt, pebbles, drywall, asbestos, lead paint, silica, liquids,
aerosols, or any flammable, combustible, or hazardous materials.
Hazardous dust. Dust created while using machinery may cause cancer,
birth defects, or
long-term respiratory damage. Be aware of dust hazards associated with
each work piece material, and always wear a NIOSH-approved respirator to
reduce your risk.
Dust allergies. Dust from certain woods may cause an allergic reaction in
people and animals.
Make sure you know what type of wood dust you will be exposed to in case
there is a possibility of an allergic reaction.
Wear respirator. Fine dust that is too small to be caught in the filter will be
blown into the ambient air during operation. Always wear a NIOSH-approved
respirator during operation and for a short time after to reduce your risk of
permanent respiratory damage.
Emptying dust. When emptying dust from the collection container, wear a
respirator and safety glasses. Empty dust away from ignition sources and
into an approved container.
Disconnecting power supply. Turn the switch off, disconnect the dust
collector from the power supply, and allow the impeller to come to a
complete stop before leaving the machine unattended or doing any service,
cleaning, maintenance, or adjustments.
Suspended dust particles and ignition sources. Do not operate the dust
collector in areas were explosion risks are high. Areas of high risk include,
but are not limited to, areas near pilot lights, open flames, or other ignition
sources.
Fire suppression. Only operate the dust collector in locations that contain a
fire suppression system or have a fire extinguisher nearby.
Impeller hazards. Do not place your hands or tools near the open inlet
during operation for any reason. The powerful suction could easily cause
accidental contact with the impeller, which will