10HP Bag Filter Dust Collector Manual
16
GENERAL TOOL ASSEMBLY
Tools Required
Open end wrench 12 (not supplied)
Open end wrench 14 (not supplied)
Open end wrench 17 (not supplied)
SEVERE LACERATION HAZARD. TURN THE UNIT “OFF”,
DISCONNECT THE UNIT from the power source and wait 2-
1/2 minutes to allow time for internal rotating components to stop before
installing or removing accessories, before adjusting or changing set-ups,
clearing clogs or when making repairs. For your own safety, do not connect
the machine to the power source until the machine is completely assembled.
Please also make sure that you read and understand the entire instruction
manual.
ASSEMBLY TIME ESTIMATE
4 hour to 5 hours
DISCONNECT THE MACHINE FROM THE POWER SOURCE!
1.
MANUAL BAG CLEANING
SHAKER
Take the housing assembly with
the top filter bags; the shaker has
already been set in place inside
the filter bags. (Fig. 1) You need
to lift the upper frame (Fig. 3) and
take the triangular tips and bolt
onto the upper frame using the
hex bolts 3/8”, flat washers 3/8”
and lock nuts 3/8”. (Fig. 2) Do not
completely fasten, as you will
need it to be movable to clean the
filter bags. You will need to do the
same for the opposite side.
Fig.1
Fig.2
Fig.3
Summary of Contents for iFlux 10 Elite
