laguna iFlux 10 Elite, Manual

Page: 20 / 32

10HP Bag Filter Dust Collector Manual
20
9. ASSEMBLE EZ LIFT
HANDLE
First remove the three hex bolts
3/8”, flat washers 3/8” and lock
3/8” from underneath the lower
filter housing. Set aside for use
when you assemble the ez lift
handle. The inner row of bolts will
need to bolt on with one hand/arm
reaching in from inside the filter
housing. Do the same for the other
handle. (Fig. 19 and Fig. 20)
Take the ez lift handle kit, both
handles are the same it does not
matter which one you take; make
sure you have the right side facing
upwards to match the bolt holes
on the filter housing. (Fig. 21)
Aerial view
Side view
Fig.19
Fig.20
Fig.21
10. ASSEMBLE EZ LIFT
HANDLE TO DRUM LID
One person must stand in the front
where the handle kit is, and hold up
the two side bars. Take note that the
handle must be in the lower position,
push the drum kit underneath the
filter housing to make the attachment
(Fig. 22). Use the hex bolts 3/8” flat
washers and lock nuts 3/8” to
assemble the side bar to the drum lid
spring support base on each side (Fig.
23). Do the same for the other drum.
Fig.22 Fig.23