Laguna Tools SuperMax 19-38 Combo, Owner'S Manual

Page: 9 / 41

9
3
Note: Long rail on top of short rail and both rails inside of legs.
4
Connect the second leg sub-assembly to the top long rails.
5
Attach the lower cross braces to the legs – again,
the longer cross braces should sit on top of the short
ones.
6
Thread a hex nut onto each of the leveling feet attach
a leveling foot to the bottom of each leg with the
hard- ware order as shown (not required if installing
optional caster set #98-0130).
Note: After final assembly and sander installation,
adjust the nuts on the threads as needed to level the stand.