29
Troubleshooting Guide: Conveyor
P
ROBLEM
P
OSSIBLE
C
AUSE
S
OLUTION
Conveyor rollers run
intermittently.
1.
Shaft coupling loose.
Align shaft flats of gear motor
and drive roller; tighten shaft
coupling set screws.
Conveyor belt slips
on drive roller.
1.
Improper conveyor belt
tension.
Adjust belt tension (page 8).
2.
Excessive depth of cut.
Reduce depth of cut;
reduce feed rate.
Stock slips on
conveyor belt.
1.
2.
Excessive depth of cut.
Tension rollers too high.
Reduce depth of cut.
Lower tension rollers (page 9).
3.
Excessive feed rate.
Reduce feed rate.
4.
Dirty or worn conveyor
belt.
Clean or replace conveyor
belt.
Conveyor belt tracks
1.
Belt out of adjustment.
Readjust belt; (page 8).
to one side, or oscillates
from side to side.
2.
Drive or driven conveyor
Readjust
belt rollers misaligned.
3.
Conveyor table not flat
and square.
Readjust by leveling
machine
4.
Conveyor belt worn.
Replace conveyor belt (page 19).
5.
Drive roller worn
or damaged.
Replace drive roller.
6.
Roller bushings elongated
due to excessive wear.
Replace bushings.
Summary of Contents for SuperMax 19-38 Combo
