A1. Wiring
23
A1
.W
iri
ng
REVO 1216 Lathe © 2018 Laguna Tools 10/22/2018
EN
A1. Wiring
WARNING!
VOLTAGE.
Before connecting this tool to a power supply (receptacle, outlet, etc.) make sure that the voltage
supplied is the same that is specified on the nameplate of the tool. IF IN DOUBT, DO NOT PLUG IN THE MACHINE.
Using this tool with a voltage different than that stated on the nameplate can damage the electrical components
of this machine and any such damage will not be covered by a warranty.
CIRCUIT BREAKER.
Also make sure that the power supply is equipped with the appropriate breaker and plug
according to your local electrical code. To do this, first check the motor plate to get the FLA amperage of the
machine, if worn out or not present refer to the specifications sheet. If there is any doubt in choosing the
appropriate circuit breaker, please consult an electrician or an electrical supply source.
ELECTRICAL SHOCK.
It is extremely dangerous to work on live wires and/or electrical systems that are
connected to a power source.
ALWAYS
disconnect the power from the machine prior to performing any
maintenance or adjustments work.
MOTOR WIRING:
The information in this manual was current at the time of printing but may be different than the
diagram on your machine.
ALWAYS
use the supplied wiring diagram with the machine or motor (under the
electrical covering) if present.
See Electrical Specifications here:
1.1 Specifications
Customer Support: (949)-474-1200 or [email protected]
Figure LW01 - REVO 1216 (MLAREVO1216EVS) Wiring Diagram. 110V/1PH/60HZ Power
A2. Parts
WARNING!
WARNING!
Never perform and setup, maintenance or adjustments with the machine connected to the power
source!
NOTICE!
Only use authentic Laguna Tools parts for replacements.
See Specifications here:
1.1 Specifications
Customer Support: (949)-474-1200 or
A2. Parts Contents
Revo 1216 Banjo, Tool Rest, Tail Stock, Centers
Revo 1216 Headstock Assembly
Revo 1216 Bed, Internals, Motor
Option: Stand (ALAREVO12 STAND)
Option: Mobility (MBA14/12 WHEEL SYSTEM)
Option: Extension (ALAREVO12 EXTENSION)
Revo 1216 Banjo, Tool Rest, Tail Stock, Centers
6
6
23
24
25
26
27
28
