inches above the table. The rollers must be checked at both sides of the table.
2.
To adjust the rollers, loosen the clamp screw on the top of the table, and
rotate the side adjustment screw until the 0.002 inch is achieved. Retighten the
clap screw and recheck.
Drive and pressure roller
tension adjustment.
The spring tension of the drive
and pressure rollers comes
factory set to suit general work.
If the tension needs to be
adjusted for delicate or very hard
work this can be achieved by
adjusting the screws on either
side of the machine. When adjusting, ensure that
all four screws are adjusted exactly the same
amount.
Roller tension screws
244
