adjustment flashes then release the button.
5.
Press the
set
button. Each time the set button is pressed the digit displayed
will change. Repeatedly press the set button until the correct digit is displayed.
6.
Press the
set
button and hold until the next digit flashes, and repeat the
procedure as per
5.
7. Continue until all the digits display the correct dimension of the planed
wood.
8.
Press the set button and hold. The gauge is now set.
Anti kick back teeth
9.
To check that the setting is correct. Unlock the table and adjust so that the
wood will be planed to a new dimension. Plane the wood and measure. Check
that the display is the same as the planed wood. If fine adjustment is required
repeat setting procedure.
Anti kick back teeth
The anti kick back teeth must be free to
move or they will not fulfill their function.
With the power disconnected, check that all
the teeth move freely. If they do not
lubricate with Teflon based lubricant.
Fitting teeth to the Sher-tec cutter head
The carbide cutter head [Sher-Tec] has
multiple teeth which have 4 cutting edges.
The teeth can be rotated as follows when
they are blunt or damaged.
Cutter head
guard
Note.
You will notice that each cutter tooth
has a registration dot to enable you to
ensure that the teeth are moved round in the
same direction.
Dust chute
22
