background image

Dake Corporation 

1809 Industrial Park Dr. 

Grand Haven, MI 49417 

www.dakecorp.com

 

 

974315 

  4 

REV112019 

 

 

RETURN & REFUND POLICY 

Thank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are 

here to help. 

Returns 

All Dake manufactured / distributed machines, parts and couplings include a 30-day return 

option. These policies are valid from the date of final shipment to the end user. 

To be eligible for a return, the item must be unused and in the same condition as received. 

All requested warranty claims must be communicated to the distributor or representative 

responsible for the sale. Once communication has been initiated, Dake Customer Service must 

be contacted for approval:  

 

  

Phone: (800) 937-3253  

  

Email: [email protected] 

Once the return request has been approved by Customer Service, a representative will supply a 

Return Material Authorization (RMA) number. The returned item must have the provided RMA 

number clearly marked on the outside packaging. Any item received without an RMA number 

clearly visible on the packaging will not be processed.  

An RMA number can only be provided by the Dake Customer Service team and must be 

obtained prior to the return shipment. 

Refunds 

Once the item has been received and inspected for damages, a representative will notify the 

requestor referencing the provided RMA number. 

If the return is approved, a refund will be issued to the original method of payment, less a 20% 

restocking fee. The restocking fee may be waived if an order is placed at the time of return with 

like-value merchandise. 

Transportation costs are the responsibility of the end user and will not be credited upon return 

approval. 

Any item that is returned after the initial 30 days or has excessive/obvious use will not be 

considered for a full refund. 

 
 

 

 

Summary of Contents for DAKE SUPER CUT 315


























Reviews: