Dake Corporation
1809 Industrial Park Dr.
Grand Haven, MI 49417
974315
7
REV112019
•
All internal and/or internal operation, maintenance or repairs, must be performed in a
well-lit area or where there is sufficient light from extra sources so as to avoid the risk id
even light accidents.
•
It is forbidden to disconnect the “man present” device, known more correctly as the
“safety switch with hold-down action”.
•
Check that the voltage indicated on the plate, normally fixed to the machine motor, is the
same as the line voltage.
•
Check the efficiency of your electric supply making sure the machine has its own
grounded circuit.
•
Do not operation machine without safety guards or with the electrical panel cover
removed.
•
Then the tool head is in rest position (raised), the toothed blade must be stationary.
•
Always disconnect the machine from the power socket before changing the blade or
carrying out any maintenance job, even in the case of abnormal machine operation.
•
Do not operate this machine without the handle and/or handle switch disconnected.
•
Always wear OSHA approved safety glasses when operating this machine.
•
Never put your hands or arms into the cutting area while the machine is operating.
•
Do not shift or move machine while the machine is in operation.
•
Do not wear loose clothing with sleeves that are too long, gloves, bracelets, rings,
watches, chains, or any other object that could get caught in the machine during
operation; tie back long hair.
•
Keep the machine bed free from tools or any object, while the machine is in operation.
Locations of shields:
•
Grey metal shield screwed onto the blade head. (REF. A)
•
Self-regulating mobile blue plastic shield fitted coaxially with the fixed shield. (REF. B)
•
Black plastic cover, covering the electrical supply box.
*
picture may vary by model
