Laguna Tools 16HD Classic, Manual

Page: 7 / 100

7
Noise emission
Notes concerning noise emission: Given that there exists a relationship between
noise level and exposure times, it is not precise enough to determine the need
for supplementary precautions. The factors affecting the true level of exposure
to operators are clearly the amount of time exposed, the characteristics of the
working environment, other sources of dust and noise, etc.: for example,
adjacent machines, in other words the level of ambient noise. It is possible that
exposure level limits will vary from country to country.
Measuring system Standard ISO 7960 - annex J ( NFE 64-209 )
Measuring system Standard ISO 7960 - annex J ( NFE 64-209 )
Measurements tolerance < 4 dB
Working, without
aspiration
L Aeq LW (A) Lpc
84,7 dB (A) 97,1 dBw (A) 5,1 mW (A) < 130 dB (A)
Receiving your machine
Note: It is probable that your machine will be delivered by a third party. Before
you unpack your new bandsaw you will need to first inspect the packing,
invoice and shipping documents supplied by the driver. Insure that there is no
visible damage to the packing or the machine. You need to do this prior to the
driver leaving. All damage must be noted on the delivery documents and signed
by you and the delivery driver. You must then contact the seller [Laguna Tools]
as soon as practical. If damage is found after delivery, contact the seller as
soon as practical.