B – Commissioning
❖
The appliance must be unplugged from the mains
❖
Once the appliance is assembled, it may be connected to
the mains.
❖
Place the fruits (see “preparation advice”) in the opening of
the plastic cover and set a speed (1 for soft fruits or 2 for
hard fruits, see chart on page 56).
❖
Press
lightly
and
uniformly
with
the
pusher.
It
is
recommended that you push slowly to extract maximum
juice.
❖
Put the appliance back in position “0” as soon as the juice
is over.
❖
It is recommended to empty the pulp collector pan
regularly. To do this, place the appliance in position “0” and
remove the pan carefully.
❖
IMPORTANT: do not let the pulp collector pan overflow as
this may damage your appliance.
C - Maintenance:
❖
Before cleaning your appliance, check that it is properly
unplugged.
❖
Before folding the safety bar, remove the pulp collector
pan by tilting it slightly.
Removable parts:
❖
Once your appliance has been dismantled, immediately
rinse all removable parts in order to prevent pulp from
drying up.
❖
Use only hot soapy water. Never use abrasive products.
❖
Clean the filter with a brush for dishes. Make sure that all
micro-perforations are properly unblocked as this could
otherwise reduce the efficiency of your appliance. If,
however, you find it difficult to unblock all the micro-
perforations, let the filter soak for 10 minutes in hot soapy
water. Examine the rotary filter, if it is damaged, do not use
the appliance any more.
❖
Food can lightly stain the plastic cover of your appliance.
To remove this staining, you can dip the cover in hot water
mixed with a little lemon juice.
❖
Dry all parts properly after cleaning.
❖
IMPORTANT
: never put the filter or the pusher in the
dishwasher.
Motor unit:
❖
Clean the motor unit using a damp cloth.
❖
IMPORTANT
: never dip the motor unit in water
CAUTION, when the appliance is operating:
- Never open the plastic cover
- Never put your hand or any accessory other than the
pusher in the feed tube.
- Never operate the juicer for more than 60 seconds
continuously when using speed 2 and when the
pressure on the pusher is too large.
56
LAGRANGE Centrifugeuse:LAGRANGE Grill'Pierre 20/06/07 15:06 Page 58
Summary of Contents for 409 006
Page 2: ......
