42
Dolce Vita
|
RATTAN
above ground pool
Assembly Instructions
&
Owner’s Manual
11.3 Final Assembled Pool
Section 12. Use and Maintenance
12.1 Before First Use
Before first using your pool:
1.
The pool must be filled with clean water.
2.
Chlorine must be always poured into the skimmer with the pump switched on (or a chlorine tab be placed in
the skimmer basket).
The contact between chlorine and the liner will cause a fading of the liner colour, but it will not weaken the
structure. So you have to pay attention while pouring the chemicals into the skimmer.
Choline vapour is dangerous, be carefull and avoid breathing it!
3.
When you intend to shut the filtration system off for a long period we recommend to remove any
undissolved residue of chlorine from the skimmer.
While dissolving slowly, chlorine would fall over to the bottom of the skimmer with the above-mentioned
effects.
4.
Your pool liner is made in one piece of a PVC coated polyester membrane with mold and antifungal
treatment. This high quality membrane has been developed for more than 40 year and does not require any
particular maintenance.
At the first filling with water, during the first weeks, it might happen to notice some sweating on the surface
of the liner. This is a normal characteristic and doesn’t effect the strength and the durability of the liner and is
not intended as a defect. Let the wet spots dry naturally, dont wipe them. This phenomenon will disappear in
few days.
NOTE: The mold treatment is for the most common Swimming Pool Molds. This doesn’t effect the strength and the
durability of the liner and is not intended as a defect. This is not a valid reason for warranty replacement.
