26
Dolce Vita
|
RATTAN
above ground pool
Assembly Instructions
&
Owner’s Manual
Section 7. Liner Installation
7.1
Prepare the Liner
• Carefully clean the concrete bed of the pool and check that there are no bumps or sharp edges.
• Place the rolled liner inside the pool frame.
• Spread the liner, making sure that it is centered in the pool frame.
7.2
Fitting the Liner
• Place the liner in the aluminium profile (see section drawings below). Start in a corner where there is a cut in
the hard plastic lip. Ensure long and short edges are in the correct orientation before fixing it into postion.
• Ensure that the thickened edge of the liner is inserted deep beyond the lip into the aluminium channel.
