Recall
1. In the stopwatch mode, press
"C" to display the time of first
Split when the stopwatch have
multi split time;
2. Press "D" to forward browse the
SPL1-SPL8 time;
3. Press "C" to backward browse
the SPLB-SPL 1 time;
4. Press "A" or "B" to return to
stopwatch mode.
• The maximum stopwatch record is 8.
• The way to browse SPL and LAP is
the same.
• When change the type of
stopwatch, all the data will auto
clear.
• When the countdown timer reaches
zero, the alarm sounds for about 60
seconds and press any button to
break it.
Countdown
Timer Setting
1. In the countdown mode, press
and hold "A" until the hour to flash
(flashing indicated in setting
mode);
2. Press "D" to increase the hour,
press "C" to decrease the hour,
press and hold to adjust at high
speed;
3. Press "B" to select the next
selection;
4. Repeat step 2 & 3, the selection
in the following sequence:
Hour-Minutes -Seconds;
5. Press "A" to exit the set state,
after you set.
Use Countdown Timer
1. Press "D" to start the countdown
timer;
2.To pause by pressing "D" again.
A beep sound when the timer
countdown to 60, 50, 40, 30, 20,
10,5,4,3,2, 1seconds for the
countdown timer.
When the countdown timer stop,
Press "A" return to the last set
value.
-4-
• The alarm sounds at the preset tim
each day for about 60 seconds,
press any button to break ii.
Chime And Alarm
• In the alarm mode, press "C" to
select chime, alarm 1-alarm5.
• In the alarm 1-alarm5 state, press
"D" to on/off the alarm.
• In the chime state, press "D" to
on/off the chime.
.
D
D
.
ALARM
