background image

CITIZEN QUARTZ

ECO-DRIVE

Model No. EP7XXX

Cal. No. A23

• INSTRUCTION MANUAL

CTZ B6815

A. BEFORE USING
This watch is not powered by an ordinary battery,
but by converting light energy into electrical energy.

A secondary battery is used in this watch to store
electrical energy. This secondary battery is a clean
energy battery which does not use any toxic
substances such as mercury. Once fully charged,
the watch will continue to run for about 40 days
without further charging.
To use this watch comfortably, make sure that the
watch is always recharged before it stops.
There is concern of overcharging this watch.
(Overcharging Prevention Function is included.)
We recommend that you recherge the watch
every day.

B. SETTING THE TIME AND CALENDAR

 

Setting the time

1. Stop the second hand at the 0 second position by

pulling the crown out.

2. Turn the crown to set the time.
3. After setting the time, firmly push the crown back

in to the normal position.

 

Setting the time

1. Stop the second hand at the 0 second position by

pulling the crown out to the 2nd click.

2. Turn the crown to set the time.
3. After setting the time, firmly push the crown back

in to the normal position.

 

Setting the calendar

Adjusting the date
1. Pull the crown out to the 1st click.
2. Set the desired date by turning the crown.
• Do not adjust the date when the watch display is

reading between 9:00 pm and 1:00 am, otherwise
the date might not change on the following day.

3. After you have set the calendar, be sure to firmly

return the crown to its normal position.

Before using, expose to light and make sure
the watch is sufficiently charged.
See “F. TIME REQUIRED FOR CHARGING” for
charging time reference.

Summary of Contents for QUARTZ ECO-DRIVE EP7XXX CTZ B6815

Page 1: ...CALENDAR Setting the time 1 Stop the second hand at the 0 second position by pulling the crown out 2 Turn the crown to set the time 3 After setting the time firmly push the crown back in to the normal position Setting the time 1 Stop the second hand at the 0 second position by pulling the crown out to the 2nd click 2 Turn the crown to set the time 3 After setting the time firmly push the crown bac...

Page 2: ...nd prevents overcharging D CARE AND HANDLING DURING CHARGING Notes on use Take care to charge your watch during use Please note that if you wear long sleeves the watch can easily become insufficiently charged because it is hidden and not exposed to light When you take the watch off place it in as bright a place as possible and it will always continue to run properly Notes on recharging Avoid recha...

Page 3: ...warning function In such a case expose your watch to light for a while to cancel the warning The second hand returns to moving at one second intervals when the energy is recharged If the watch is left short of energy it will stop functioning after a day or so If the watch warns you to set the time When the watch that has stopped is exposed to light the second hand starts a hitch movement Quick sta...

Page 4: ...ng caught between the crown and the watch case when the watch is worn for long periods of time To help prevent this from happening turn the crown freely back and forth occasionally while it is in the normal set position Wipe off any water and moisture that adheres to the case glass and band with a soft clean cloth Any dirt left on the case or band may cause skin rash A watchband will easily become...

Reviews: