![background image](http://html.mh-extra.com/html/lacie/d2-blu-ray-xl/d2-blu-ray-xl_user-manual_668391040.webp)
4. Using Your LaCie Drive
page 40
LaCie d2 Hard Drive
User’s Manual
4.1.2. Windows Users
• Windows 98 SE and Me – Install and use LaCie
Silverlining 98
, which is included with your drive.
• Windows 2000 and XP – Use the Disk Management Utility, which is native to the operating system.
For instructions on installing and using
Silverlining 98
, please refer to the
Silverlining 98
manual, located on your LaCie
Storage Utilities CD, in PDF format.
Formatting And Partitioning Using Windows 2000 And Windows XP
The process of formatting and partitioning a drive on a computer running Windows 2000 or Windows XP consists of two
steps: (1) installing a signature on the drive, and (2) partitioning/formatting the drive. These steps will erase anything that is
on the disk.
1) Connect the drive to the computer via one of the interface ports.
2) Right-click
My Computer
and click
Manage
.
3) From the
Computer Management
window, select
Disk Management
(located below the Storage group).
4) If this is the first time the drive is being
formatted, Windows 2000 will launch the
Write Signature Wizard
(
Write Initialize
Wizard
in Windows XP). Click
Next
.
5) Windows will list the new drive(s)
attached. If you are formatting a single
drive, only one drive should be visible.
Select the checkbox next to the drive and
click
Next
.
6) Click
Finish
to exit the Wizard.
7) Now, with the disk management
window open, a new drive will be visible.
Right-click on the available space and
select
Create Partition...
8) This will bring up the
Create Partition Wizard
. Click
Next
.