3. Installing Your LaCie Drive
page 29
LaCie d2 Hard Drive
User’s Manual
Windows 2000 And Windows XP – iLink/DV
After the first connection of a FireWire-based peripheral, Windows detects the drive, and will install it automatically as a new
peripheral, even if you have previously installed it on another port on the same FireWire bus. Let Windows install the
FireWire drivers of your LaCie drive.
Connect the 6-pin end of the iLink/DV cable into the
FireWire 400 port on the back of the LaCie d2 Hard Drive.
Connect the 4-pin end of the
iLink/DV cable into an
available iLink/DV port on
your computer or device.
1
2
3
4
Computer models vary. Please consult your computer’s User’s Manual for the exact location of your interface.
Tech Note:
For more information about
FireWire, please see sections:
•
2.3.1. FireWire
•
5.3. Optimizing Data Transfers
•
6. FireWire Questions & Answers
.
After following the steps in
3.1. Connecting The Power Supply
, power on the drive by pressing the On/Off button
on the front of the drive.
Your LaCie d2 Hard Drive will now be ready for
use. Now you will need to format and partition
the drive to suit your needs. Please see
4.1.
Formatting And Partitioning Your LaCie Drive –
4.1.2. Windows Users
for more information.