LaCie Dupli Disc DVD125 USB 2.0
User Manual
page
Using Your LaCie Dupli Disc DVD125
The
Copy
mode allows you to copy data directly
from a source DVD/CD disc onto a blank DVD/CD
disc. Before copying, make sure that the source disc is
placed into the source drive (see menu 8). Any of the six
drives can be used as the source drive. Factory defaults
set the top drive as the source. After the initialization
process has finished, verify the Dupli Disc DVD125
displays the following screen:
4.1.
“1. Copy”
1. Copy
Copying - DVD*
0%
xxxx.x MB
X:XX
Or press the
Down Arrow
until the function
1.
x
Copy
is displayed.
Place a source DVD or CD disc into the DVD-
ROM drive.
Place one DVD blank media (or a blank CD if the
source media is a CD) into the DVD±RW drive(s).
You can use from 1 to 5 DVD±RW drive(s), depend-
ing on the number of copies you would like to get.
1.
2.
MB = number of megabytes remaining to be copied
x:xx = remaining time before completion
x% = percentage of completion
ImpOrTANT INfO:
You can cancel a function
at almost anytime by pressing the
ESC
button for
2 seconds. An error message will be displayed. In
some cases, the LaCie Dupli Disc DVD125 will
freeze. In this case, you need to restart the Dupli
Disc.
* If the source disc is a CD, it displays:
Copying - CD
After the drives have detected the source media, press
the
ENT
button to start the duplication.
The Display screen will show the following during
the copy process:
3.
4.
