LaCie Dupli Disc DVD125 USB 2.0
User Manual
page
Forward
Class I Laser product
This equipment is certified to comply
with DHHS Rule 21 CFR Chapter I,
subchapter J in effect as of the date of
manufacture.
This equipment is classified as a Class
I Laser product and no hazardous laser
radiation is emitted outside the drive.
Laser Specification
Class I Laser product
Wave Length: 635-675 nm / 640-66
nm, 775-815 nm
Laser Power: No hazardous radiation
is emitted.
This symbol on the prod-
uct or on its packaging
indicates that this prod-
uct must not be disposed
of with your other household waste.
Instead, it is your responsibility to
dispose of your waste equipment by
handing it over to a designed collec-
tion point for the recycling of waste
electrical and electronic equipment.
The separate collection and recycling
of your waste equipment at the time of
disposal will help to conserve natural
resources and ensure that it is recy-
cled in a manner that protects human
health and the environment. For more
information about where you can drop
off your waste equipment for recycling,
please contact your local city office,
your household waste disposal service,
or the shop where you purchased the
product.
Only qualified persons are autho-
rized to carry out maintenance on
this device.
Read this User Manual carefully
and follow the correct procedure
when setting up the device.
Do not open your duplicator or at-
tempt to disassemble or modify it.
Never insert any metallic object
into the drive to avoid any risk of
electrical shock, fire, short-circuit-
ing or dangerous emissions. Your
•
•
•
duplicator contains no user-service-
able parts. If it appears to be mal-
functioning, have it inspected by a
qualified LaCie Technical Support
representative.
Never expose your device to rain,
or use it near water, or in damp or
wet conditions. Never place objects
containing liquids on the duplicator,
as they may spill into its openings.
Doing so increases the risk of elec-
trical shock, short-circuiting, fire or
personal injury.
•
Make sure that the computer and
duplicatord are electrically ground-
ed. If the devices are not grounded,
there is an increased risk of electri-
cal shock. Power requirements 100-
240 V~, 1.5 A, 60-50 Hz, (Supply
voltage fluctuations not exceeding ±
10% of the nominal, transient over-
voltages according to over-voltage
category II).
•
Health and Safety Precautions
