7. Cleaning, Maintenance, and Disposal
77
14. Place the stop-ring on the end of the filter assembly tool and turn it so it
cannot slip off.
15. Using the filter assembly tool, push the stop-ring into the filter slot and
press firmly into place.
16. Rotate the tool until the notch in the stop-ring is aligned with the end of
the filter assembly tool and remove the tool.
17. Place the filter wheel back into the filter wheel slot and push it deeper
until it is secured magnetically.
18. Reattach the cover plate back onto the bottom of the instrument with the
three orange screws.
19. Bring the device back into an upward position.
20. Click
OK
to finalize the procedure and initialize the filter wheel.
21. Define the newly inserted filter (see next chapter for detailed procedure).
