Labrie Top Select, Maintenance Manual, Page: 61 / 145

Loading Container Maintenance
53
6. Engage the pump.
7.
Test the system to make sure the cart latch comes back up.
8. Cycle the loading bucket 2 or 3 times.
9.
If the latch system is properly adjusted, check the screws are correctly tightened.
10. Make sure the shaft moves smoothly and the bearing turns easily. Add lubrication if needed.
N
OTE
: If the latch system is not properly aligned, repeat the procedure.
Figure 5 - 16 Latch mechanism
Replacing Rod Ends of Mobile Roof
N
OTE
: This procedure only applies to units equipped with one loading bucket.
To replace both rod ends of the mobile roof:
1.
Ensure the parking brake is applied.
N
OTE
: Perform this procedure one rod at a time.
2.
Start the truck’s engine.
3. Engage the hydraulic pump.
Do not forget to fully open the hydraulic shut-off valve before starting the engine (see
Prior to Start Up on page 24).
At least 2 people are required for this procedure.
Latch (up position)
Bottom lock
WARNING!
DANGER!