4
3)
GENERAL SAFETY RULES
a)
Before attempting to install, commission or operate equipment the manufacturers instructions
should be understood and implemented.
b)
It is dangerous to misuse equipment or ignore instructions, regulations or warnings.
c)
Do not exceed specified maximum operating conditions (e.g. temperature, pressure, speed
etc.).
INSTALLATION
a)
Use lifting tackle where possible to install heavy equipment.
b)
Care should be exercised to avoid damage to the equipment during handling and unpacking.
c)
Ensure that all services are compatible with the equipment and that independent isolators are
always provided and labelled. Use reliable connections in all instances, do not improvise.
d)
Ensure that all equipment is earthed and connected to an electrical supply at the correct
voltage. The electrical supply must incorporate an Earth Leakage Circuit Breaker (ELCB) or
Residual Current Circuit Breaker (RCCB) to protect the operator from electric shock in the
event of misuse or accident.
e)
Potential hazards should always be the first consideration when deciding on a suitable location
for equipment. Leave sufficient space around equipment.
COMMISSIONING
1)
Ensure that equipment is commissioned and checked by a competent member of staff.
4)
COMPONENTS INCLUDED
The SD-06 is supplied complete and ready for operation without any extra equipment normally being
required. Options are available such as alternative jet nozzle spray assembly sizes, exhaust wet
scrubber, floor stand, protective screen, large main chamber, etc. The unit comprises:
Main Unit.
Including control panel, inlet air filter, top chamber, peristaltic pump, with
motor and controller, outlets from compressors to jet de-blocker and jet
nozzle, cyclone support arm and exhaust stack.
Spray Assembly
Main chamber, chamber/cyclone tube, collection bottle and bottom collection
tube.
Other Items
All necessary silicone pump tubing, exhaust tubing, connectors, clamps and
PTFE gaskets.
