background image

 SLx 40 

WARRANTY

26

8126400-795 

 SLx 40 

Issue 1.3

Printed on April,2019

This product is warranted by Labo America Inc. against defective material and workmanship under normal
use for a period of one year from the date of invoice to the original purchaser.(An authorized dealer shall not
be considered an original purchaser). Under this warranty, Labo America Inc. sole obligation is to repair or
replace the defective part or product at Labotech/Labomed descretion.

This warranty applies to new product and does not apply to a product that has been tampered with, altered
in any way, misused, damaged by accident or negligence, or which has had the serial number removed,
altered or effaced. Nor shall this warranty be extended to a product installed or operated in a manner not in 
accordance with the applicable LABOMED instruction manual, nor to a product which has been sold,
Serviced, installed or repaired other than by a Labo America Inc. factory or authorized LABOMED Dealer.

Lamps, bulbs, charts, cards and other expendable items are not covered by this warranty.

All claims under this warranty must be in writing and directed to the LABOMED factory, or authorized
instrument dealer making the original sale ands must be accompanied by a copy of the purchaser’s invoice.

This warranty is in lieu of all other warranties implied or expressed. All implied warranties of merchantability
or fitness for a particular use are hereby disclaimed. No representative or other person is authorized to 
make any other obligations for a LABOMED product. Labotech/Labomed shall not be liable for any special,
incidental, or consequent damages for any negligence, breach of warranty, strict liability or any other
damages resulting from or relating to design, manufacture, sale, use or handling of the product.

PATENT  WARRANTY 

If notified promptly on writing of any action brought against the purchaser based on a claim that the
instrument infringes a U.S. Patent, Labo America Inc. will defend such action at its expense and will pay
costs and damages awarded in any such action, provided that Labo America In. shall have sole control of
the defense of any such action with information and assistance (at Labo America Inc. expense) for such
defense, and of all negotiation for the settlement and compromise thereof.

PRODUCT CHANGES

Labo America Inc. reserve the right to make changes in design or to make additions to or improvements in 
its products without obligation to add such to product previously manufactured.

CLAIMS FOR SHORTAGES

We use extreme care in selection, checking, rechecking and packing to eliminate the possibility of error. If
any shipping errors are discovered:
     1.  Carefully go through the packing material to be sure nothing was inadvertently overlooked when the
             unit was unpacked.
    2.  Call the dealer you purchased the product from and report the shortage. The material are packed at
            the factory and none should be missing if the box has never been opened.
     3.   Claims must be filed within 30 days of purchase.

CLAIMS FOR DAMAGES IN TRANSIT

Our shipping responsibility ceases with the safe delivery in good condition to the transportation company.
Claims for loss or damage in transit should be made promptly and directly to the transportation company.
If, upon delivery, the outside of the packing case shows evidence of rough handling or damage, the
Transportation company’s agent should be requested to make a “Received in Bad Order” notation on the
Delivery receipt. If within 48 hours of delivery, concealed damage is noted upon unpacking the shipment
and no exterior evidence of rough handling is apparent, the transportation company should be requested to
make out a “Bad Order” report. This procedure is necessary in order for the dealer to maintain the right of
recovery from the carrier.

 

Summary of Contents for SLx 40





























Reviews: