BA_060 Rev 1B6 Pressure transmitter PASCAL CS
Page 9/20
An example of button functions available in menue mode is shown below.
> 1 s
Figure 8: Button function in menue mode (example)
For the sake of simplicity, the return to the next higher menue and directly to display mode
will not be shown anymore.
6.1.5
Setting values
There are two types of values that can be altered:
−
values that can be selected from a predefined parameter list
−
numerical values
Selecting a value from a parameter list
Parameter lists – for example, the units list – behave like a menue. You can scroll through
the list in both directions with the arrow buttons. Each list contains the "
-rEt-
" item, which
allows you to return to the next higher menue level.
The middle button stores your selection. "
Stor
" appears on the display to confirm that the
value has been stored, and the device returns to the higher level menue item.
You can cancel the selection by pressing both arrow buttons at the same time. The device
will then switch back to the corresponding menue entry. The selected value will not be
saved.
Figure 9 depicts the button functions in a parameter list. E.g. if you are in the parameter list
for the unit, you can scroll thru the available units with the arrow buttons. With the middle
button you store the displayed unit. "
Stor
" appears on the display to confirm that the
changed unit has been stored and the device switches back to the menue item for select-
ing the measuring unit (
unit
).