BTA 060, Rev 1K1
Page 12/18
Figure 11: Operator actions for correcting the zero point
6.3.3 Min. and max. pointers (
Lo
/
Hi
)
The device has min./max. pointers for minimum and maximum pressure values. You can
display and reset them in this menu. Resetting a pointer is confirmed by showing "
----
"
on the display.
Display
Designation
Description
Value of min./max
pointer
Value of min./max. pointer in the selected
measuring unit
Clear
Reset the stored pointer value
Return
Return to "
Lo
" or "
Hi
"
Table 7: Parameter list for min./max. pointer
The steps needed to reset the minimum pointer are shown below.
> 2 s
> 1 s
Figure 12: Operator actions to reset the minimum pointer
