3.3.
Charging the Battery
BioPette E’s Internal Charging Circuit
Optional Charger
There are two ways to charge the battery: (1) Use BioPette E’s internal
charging circuit, (2) Use the optional charger.
Insert the battery into the battery compartment. Insert the DC-in plug of the
power adaptor into the DC-in jack (see Figure 3). Connect the power plug
of the power adaptor with the external power source.
Connecting the power
plug before inserting the battery will inactivate the charging process.
The
indication bar inside battery symbol
will blink during the charging
process. When the battery is fully charged, the blinking will stop and the
BioPette E will beep once to remind the user.
Connect the DC-in plug of the AC-DC power adaptor to the charger.
Connect the power plug of the AC-DC power adaptor to the external power
source. The indication light will turn green. Insert the battery (see Figure 4).
Once the battery is correctly inserted and charging, the indicator light will
turn red. When the battery capacity is full, the indicator light will turn green
again.
6
