3.
Press
«SET» to confirm the selection. The
symbol will
then appear.
4.
Use
«Up/Down» to select the desired mixing count.
5.
Press
«SET» to confirm the selection. The default pipetting volume
will start flashing.
6.
Use
«Up/Down» to select the desired mixing volume.
7.
Press
«SET» to confirm the selection. The total mixing volume and
counts will be displayed.
8.
Press the
PLUNGER
button to start the mixing function. After the
completion of mixing, pressing the
PLUNGER
button will re-activate the
mixing process until the user changes the function mode.
9.
SE (Sequential Aspirating/Dispensing) Mode
SE mode includes SA (Sequential Aspirating) mode and SD (Sequential
Dispensing) mode.
10.1.
SA (Sequential Aspirating) Mode – Not available on BE1000-1
because the diameter of 1000ul tips does not allow the required air
gap to be maintained.
1.
Press
«EXIT» to enter function mode selection.
22
2.
Press
«Up/Down» repeatedly until the
symbol starts flashing.
The BioPette E performs repetitive aspirations of the selected volumes. An
air gap will be created automatically between two aspirations. When the
sequential aspiration is completed, the next operation will dispense all of
the aspiration volume together.
3.
Press
«SET» to confirm the selection.
