aspirate the sample. When the aspiration is completed, the dispensing
count and volume will appear and will flash to indicate that the
BioPette E is ready for dispensing.
11.
The BioPette E will make two beeping sounds to remind the user of the
last measured volume to dispense. At the end of the sequential
dispensing cycle, if Reverse Pipette mode is selected,
will be
displayed to remind the user to press
PLUNGER
button to the dispense
the remaining extra amount of sample. After completing the
dispensing, pressing the
PLUNGER
button again will re-activate the
whole cycle until the user changes the function mode.
Note: If the blow-out setting is selected, the BioPette E will automatically
blow-out the liquid at the end of a sequential dispensing cycle.
25
