9
LOKASET R
| Installation and Operation Instructions | D18067Ae
1
5. Lokaset R – Maintenance and Repairs
The best way to maintain proper operation of the Lokaset R
device is to ensure that the probe is clean and that the radio
communication between the transmitter and the central unit
is unobstructed. All barriers, such as leaves, debris, snow, ice or
vehicles may interfere with the reception of the radio signal. If
the battery ceases to discharge power, the central unit will signal
an alarm. The easiest way to clean the Lokaset R probe is during
tank emptying. The probe may be cleaned using running water.
Operation of the Lokaset R device can be checked in conjunc-
tion with maintenance by activating the transmitter test mode.
Activate the test mode by pushing the function button (1) on
the transmitter. When the test mode is activated, the blue indi-
cator (SIGNAL) of the central unit fl ashes every 8 seconds during
test transmission. The device returns to the normal operating
mode after running the test mode for 5 minutes.
The Lokaset R central unit does not include serviceable parts.
In the event of damage, please contact the supplier. The power
cord of the central unit may only be replaced by the device
manufacturer or an authorised service organization.
