Label i-FeedGood L Quick Manual Download Page 7

Page: 7 / 60

•

FeedGood

• Quick Guide

User Interface

Display

•

FeedGood

is equipped with a brand-new 7.3” LCD screen

with  high  contrast,  large  visual  angle and white LED  backlighting.

Icons

The display has 36 icons which guide you in using the scale.

Icon

Meaning

Indicates that you are in Programming.

Indicates that you are in Recipes Execution.

Indicates that you are in Target Weighing.

Indicates that you are in Manual Weighing.

Indicates that you are in Settings.

Indicates that the element displayed must be
executed in loading.

Indicates that the element displayed must be
executed in unloading.

Indicates that a Clean-Up is displayed.

Indicates that a Manual Adding is displayed.

Indicates that the Jump Function is disabled on the
displayed element.

Indicates that the Ingredient displayed has the Dry
Matter programmed.

Summary of Contents for i-FeedGood L





























































Search results

Summary of Contents for i-FeedGood L

Reviews:

Related manuals for i-FeedGood L

Brands by name

Popular brands

Label i-FeedGood L, Quick Manual

Search results

Summary of Contents for i-FeedGood L

Reviews:

Related manuals for i-FeedGood L

Brands by name

Popular brands