14
|
i
•
FeedGood
L
• Quick Guide
How to modify an element/code
1.
Select the element/code you want to modify, then press
u
.
2.
Press
q
or
p
to select the item you want to modify.
3.
Press
u
to program the selected item.
Note
: the Dry Matter represents the percentage of the dry
part of the Ingredient. Use this parameter to program the
weight of the Ingredients of the Recipes by Animals by setting
the weight only of the Dry Matter. The display will indicate
that the Ingredient has Dry Matter programmed by showing
the icon .
Note
: the Jump Function allows you to set how to pass to the
next element in Recipes Execution. The display will indicate
that the element has the Jump Function disabled by showing
the icon .
Note
: Manual Adding means an Ingredient which is not
weighed on the mixing wagon during the Recipes Execution,
but is weighed separately on a precision scale before being
poured into the mixing wagon skip. The display will indicate
that the Ingredient has the Manual Adding parameter
programmed by showing the icon .
Note
: the Tolerance is for setting a threshold to be used to
define the tolerance accepted when weighing the element.
The display will indicate that the Ingredients or Groups have
the Tolerance programmed by showing the icon .
Note
: programming Privileges and Passwords is only
important if the “Scale Protect” System Preference is set at
“Operator Management”. For further information on use of
Passwords and Privileges, see the “Scale Protect” System
Preference on the Technical Guide.
How to eliminate an element/code
1.
Select the element/code you want to eliminate.
2.
Press
MENU
, select the item “DELETE archive_name”, then
press
u
.
3.
Press
OK
to eliminate the selected Name.
