Fig. 10
Fig. 11
Fig. 12
Fig. 13
OPERATION
After starting trimmer, allow motor to turn over for a few seconds before cutting grass. Cutter wire
automatically adjusts length of the two ends of wire.
Now you can start work.
If wire is finished up, you cannot achieve desired cut.
You should occasionally tap cutter head on the ground to feed extra wire.
Tips on horizontal cutting (See Figure 10 & Figure 11.)
•
Always start appliance before cutting grass.
•
Hold machine with both hands.
•
Swing gently from one side to the other, from left to right, with trimmer at angle of 30°.
•
Cut long grass in stages.
•
Never cut damp or wet grass.
•
Do not exceed trimmer capacity. Always use it at full speed.
•
Do not touch stones, concrete or fencing with trimmer.
•
The wheel is designed to facilitate cutting next to fences and walls.
•
As soon as you feel the motor slowing down, reduce the load.
•
Open out flower guard hoop to prevent cutting flowers and flower beds (fig 11)
Tips on vertical cutting (See Figure 12 & Figure 13.)
•
Press main handle control button.
•
Pivot main handle by 90° or 180°. Beware: Head turns only in one direction.
•
Always start appliance before cutting grass.
•
Hold machine with both hands
•
Use stop wheel to move trimmer forward effortlessly.
1 4