Fig. 7
Fig. 8
Fig. 9
1 3
ASSEMBLY
Adjusting suitable cutter position (See Figure 7 & Figure 9.)
1. Unscrew tube lock ring.
2. Slide tubing to desired length
3. Tighten tube lock ring.
4. Press motor housing angle button to pivot into desired cutting position (fig 9). Release button.
(This facilitates cutting under obstacles).
5. To add an extension cable, connect an approved external extension to trimmer cable and
attach it to holder, as shown in fig. 8.
Unwinding cutter wire
Check state of cutter wire before starting machine. Wire needs to be long enough to achieve
desired cut. If necessary press winder button and pull out suitable length of wire.
Stopping/starting trimmer
1. Ensure a secure stance and hold on to the trimmer with two hand. Do not deposit the cutting
head on the ground.
2. To switch on depress the ON/ OFF switch. Release the switch to switch off.
