1 5
Fig. 15
①
②
③
④
⑤
①
②
③
④
Fig. 14
MAINTENANCE
Your grass trimmer has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING
Before performing any maintenance, switch off and unplug the tool.
•
Regularly clean the ventilation slot in your grass trimmer using a soft
brush or dry cloth.
•
Regularly clean the cutting line and spool using a soft brush or dry cloth.
•
Regularly use a blunt scraper to remove grass and dirt from the
underneath of the guard.
Fitting a new spool of cutting line (See Figure 14 & Figure 15.)
•
Unplug appliance.
•
Press cover clips
①
and remove cover from head
③
.
•
Remove empty coil
②
.
•
Clean all grass and dust from head before inserting new coil.
•
Rotate it to correct position.
•
Pass the two nylon wires across the two openings
⑤
.
•
Pull out about 10 cm of wire on each side.
•
Line up cover clips
①
in notches in head
⑤
.
•
Secure cover and check proper engagement in notches.
WARNING
If nylon wires stick out from protective housing, trim them to correct length with
a pair of scissors.
