Laars NEOTHERM NTH Series, Installation And Operation Instructions Manual

Page: 80 / 84

Page 80
LAARS Heating Systems
184 Invalid Blower/ HSI output setting L
1. Recheck selected parameters, reverify and reset module.
2. If fault repeats, verify electrical grounding.
3. If fault repeats, replace module.
185 Invalid Delta T limit enable setting L
186 Invalid Delta T limit response setting L
187 Invalid DHW (Domestic Hot Water) high
limit enable setting L
188 Invalid DHW (Domestic Hot Water) high
limit response setting L
189
Invalid flame sensor type setting
L
192 Invalid igniter on during setting L
193 Invalid ignite failure delay setting L
194 Invalid ignite failure response setting L
195 Invalid ignite failure retries setting L
196 Invalid ignition source setting L
197 Invalid interlock open response setting L
198 Invalid interlock start check setting L
199 Invalid LCI (Limit Control Input) enable
setting L
200
Invalid lightoff rate setting
L
201
Invalid lightoff rate proving setting
L
202 Invalid MFEP (Main Flame Establishing
Period) time setting L
203 Invalid MFEP (Main Flame Establishing
Period) flame failure response setting
L
204 Invalid NTC sensor type setting L