Page 61
HTD
8.A.2 Keypad Operations
A Typical Numeric Keypad Entry Screen.
A Typical Selection Screen.
To delete the current setting
before entering in the new value.
The “Enter” button is used to
accept the new value.
This is the indicator that will be shown
when the correct password has been
entered to allow the setting to change.
The highlighted button (orange)
shows which one is selected. Some
screens may only allow you to set
one or the other, while some other
screens (example: pump selection)
will allow you to select any or all of
the options.
These windows will reflect the
allowable ranges of the parameter
Shows the current setting
of the Parameter.
In this example you are in
Home/Configure/CentralHeat/CentralHeatOne
“Up and Down” arrows are used to
increment the setting accordingly.
NOTE: You can always tell exactly where you have navigated to
by looking at the icons in the
Navigation Bar.
The “Back” button jumps to the previous screen.
Remember to always save the new setting with the
button.
