LAARS Heating Systems
Page 64
Q U I C K S TA R T
8.C.2.a CH1
1
•
Enable/Disable
– This allows CH1 to be enabled/disabled. The default setting is Enabled.
•
Set Point
– This is the set point temperature.
8.C.2 DHW/DHW3
”DHW” stands for “domestic hot water.” To navigate to the DHW/DHW3 Quick Start Screen, touch the DHW icon
on the Quick Start Screen.
The DHW/DHW3 Quick Start Screen allows adjustment of the following parameters:
• Enable/Disable
– This allows DHW/DHW3 to be enabled/disabled. The default setting is Enabled.
•
Set Point
– This is the hot water set point temperature.
NOTE
: A DHW/DHW3
heat demand can be
initiated by an aquastat
or sensor, see Section
7.D.3 on page 36
8.C.2.b CH2
2
To navigate to the CH2 Quick Start Screen, touch the CH2 Icon on the CH
Quick Start Selection Screen. The CH2 screen will be have the same look and
functionality as the CH1 Screen.
