Page 93
HTD
8.E.6 Restart Touchscreen & Recalibrate
Touching the
Restart
Button on the Service Screen reboots the display. If the touchscreen seems to be out of
alignment, it can be recalibrated by pressing the Restart Button, promptly touching (and holding) the touch screen.
Follow the calibration procedure as shown on the touch screen.
8.E.7 Factory Reset
Touching the Factory Reset Button on the Service Screen resets all touch screen adjustable parameters back to the
factory default setting.
8.E.8 HMI Model
OEM only.
8.E.9 BIC Model
OEM only
.
8.E.10 Both Model.
OEM only.
8.E.11 About
About the Firmware version of the touchscreen.
8.E.12 LMV
“LMV” stands for “linkageless modulating valve” and is the burner management system on the unit.
Touching the
LMV
button on the service screen will show the LMV Status screen. This is display only. There isn’t any
functionality here.
S E RV I C E
