MANUAL LM2000
11
to remove the Bowl from the
machine.
H
/
M
/
S
count the passed time,
th
ese number can’t be adjusted
If you press exit, you will go
back to the start screen.
The hand control is mostly used
for system checks and short
milling. For operational use
please use the automatic
program.
3
Here you see the overview of
the automatic system.
There are 4 available programs,
F1 to F4. These also
correspond with the physical
numbers on the machine.
In this screen you can set the
programs. You switch between
the programs by pressing on
them, the last know settings will
load.
You can set the desired time by
pressing
H
(our) /
M
(inutes) /
S
(econds).
A number pad will appear
(see
5)
and here you can give in the
desired speed or
rotations. You confirm
it by pressing
When you have put in the
desired parameters press next
to go to the starting screen
(see
4)
and the settings will be saved
automatically.
