MANUAL LM2000
16
7. TROUBLESHOOTING
Problem
Explanation / Solution
Machine is not starting
Check the mains power supply.
Check the air pressure
Call the emergency knob and release it.
Check if you have the correct settings for running the
program.
Display doesn’t work.
Call authorized service.
Should the problem not resolve, please contact LAARMANN.
8. MAINTENANCE
LM2000 needs to be greased first time after 20 hours.
Later intervals each 40 Hours.
LAARMANN advises to use LAARMANN GREASE. Similar can be graphite free, high
temperature grease.
8.1. WEAR
The milling tools can become worn out, depending on the frequency of the milling
operation and the milled material. The milling bowl, lid and puck should be regularly
checked for wear and replaced, if necessary. Contact Laarmann for the
corresponding spare parts.
8.2. CLEANING
Before cleaning the machine, unplug the mains cord from wall socket.
Use only a soft cloth moistened with water. Cleaning agents and
solvents should not be used, not for cleaning the milling tools either.
Do not clean the LM2000 under running water. Danger to life through
electric shock.
