La San Marco TOP 85, Use And Maintenance

Page: 49 / 150

48
E
NG
lIS
h
Connect the power cord to the electrical mains as shown in the attached diagram:
3.7 Connection to the equipotential clamp
The machine is provided with an equipotential clamp placed under the tray and the bottom support
cup grid.
The terminal is identified by the equipotential symbol reported here on the side.
Connect only cables of 2.5 mm to 6 mm with ring lugs for screw M8
The connection to the equipotential clamp must be performed by LA SAN MARCO SPA authori-
zed qualified personnel.
To make the connection remove the bottom tray. On the left side of the frame,
indicated by the equipotential symbol, there is the screw-clamp to be used to
connect a cable of 2.5 mm to 6 mm with ring lugs for screw M8.
BLUE
BLACk
BROWN
GREy
yE/GR
ONLy fOR
MODELS
TOP 85 SPRINT
REMAINING
MODELS
NOTES:
* The power absorbed
by the electric heating
elements can be
reduced to 2/3 by
eliminating one of the
black wires.
BLUE
BLACk
GREy
BROWN
yE/GR
BLACk
GREy
BROWN
BLUE
yE/GR
BLUE
BLACk
GREy
BROWN
yE/GR
BLUE
BLACk
BROWN
GREy
yE/GR
BLUE
BLACk
GREy
BROWN
yE/GR
BLUE
BLACk
BROWN
GREy
yE/GR
BLUE
BLACk
GREy
BROWN
yE/GR
BLUE
BLACk
GREy
BROWN
yE/GR
BLUE
BLACk
GRIGIO
BROWN
yE/GR
BLUE
BLACk
GREy
BROWN
yE/GR
2 hEATING ELEMENTS
3 hEATING ELEMENTS
3 hEATING ELEMENTS
3 hEATING ELEMENTS
3 hEATING ELEMENTS
230V MONO-PhASE
400V-3 TRI-PhASE
230V-3 TRI-PhASE
230V MONO-PhASE* 400V-3N TRI-PhASE
230V-3 TRI-PhASE