38
english
11. safety devices
11.1 Manual reset safety thermostat
The safety thermostat is located next to the control unit and can be accessed by removing the left side panel
from the coffee machine. The thermostat probe, placed inside the electric heating elements, cuts the electric
power supply any time there is an abnormal rise in temperature. The heating elements no longer heat the
water in the boiler and it will not be possible to use the appliance correctly. Call the lA SAN MARCO SPA
technical service centre for assistance.
The safety thermostat will have to be reset by a technician authorised by LA SAN MARCO SPA,
who must first remedy the cause of the coffee machine shutdown.
11.2 Safety valve
The safety valve is installed on the upper part of the boiler, in the part corresponding to the area occupied by
the steam. The valve is activated if there is a considerable pressure increase inside the boiler. The valve rap-
idly lowers the pressure by expelling the steam in the atmosphere (the valve trips at 2÷2.5 bar). If the safety
valve trips, the steam is held and dissipated inside the machine body, so as to avoid hazards for the persons
around the machine.
In case of activation of the safety valve, switch off the machine and immediately contact the spe
-
cialized technician.If the safety valve is set off, switch the machine off and immediately contact
the authorized LA SAN MARCO SPA
technician.
12. User information
In accordance with article 13 of the legislative Decree dated 25 july 2005, no. 151 "Imple-
mentation of Directives 2002/95/EC, 2002/96/EC and 2003/108/EC, concerning the use of
hazardous substances in electrical and electronic equipment, as well as waste disposal".
• The symbol with the crossed-out dustbin on the equipment or on the packaging means
that at the end of its life cycle, the appliance must be collected separately from other
waste.
•
The differentiated waste disposal of this equipment at the end of its life cycle is organised and managed
by the manufacturer. Should the user wish to dispose of this appliance, he or she should therefore contact
the manufacturer and follow the procedure implemented by the same for the separate collection of the
appliance at the end of its life cycle.
•
Suitable separate collection of the appliance for subsequent recycling, treatment and eco-compatible
disposal contributes to preventing possible negative consequences for the environment and health, and
favours the recycling of materials that the appliance is made of.
•
Illegal disposal of the appliance by the user will result in the application of administrative fines as set forth
in the applicable regulations in force.
