La Pavoni LPSGEV02, Instruction Manual

Page: 31 / 178

26 27
EN
1. Replace the coffee
2. Adjust the coffee grind
3. Increase the amount of
coffee and compact it properly
No froth forms
on the coffee
1. The coffee blend is not
suitable for this type of
machine
2. The grinding is unsuitable
3. There is not enough coffee
1. Follow the instructions
given in section 4.1– 4.2
2. The filter holder should
be heated at the same time
as the water, see section
4.1– 4.2
3. Heat the cups properly on
the cup warmer (3)
4. Contact an authorised
service centre
The coffee is too
cold
1. The machine had
not reached the correct
temperature
2. The filter holder had not
been pre-heated
3. The cups have not been
preheated
4. The thermostat is not
working within the required
range
1. See section 4
2. Clean the hole with a
needle
3. See section 4
The machine does not
dispense steam
1. The circuit has not been
filled
2. The hole at the end of the
steam nozzle is clogged
3. No water in the tank
1. Insert it properly
2. Reduce the amount of
coffee
3. Remove coffee residues
from the edge of the filter
holder and clean the group
head gasket
4. Contact an authorised
service centre
Coffee leaks between the
group
head and the
filter holder
1. The filter holder is not
inserted correctly
2. There is too much coffee in
the filter basket
3. The edge of the filter holder
has not been cleaned
4. The group head gasket is
worn
1. Contact an authorised
service centre
The coffee is too hot 1. The thermostat is not
working within the required
range