background image

2

EN

1) 

This operating manual is an integral and

essential part of the product and must be

supplied to users. Users are asked to read

the  enclosed  warnings  carefully,  as  they

provide  valuable  information  concerning

safety  during  installation,  operation  and

maintenance.

This manual must be kept in a safe place

and  be  available  for  consultation  to  new

and experienced users alike.

2)

Make sure of the product’s integrity by

inspecting  the  packaging,  making  sure  it

presents no signs of damage which might

have affected the enclosed machine.

3)

Check  the  machine’s  integrity  after

having  carefully  removed  the  packaging.

When in doubt, do not proceed, contact

your  dealer  or  retailer  immediately.

They  will  send  out  specialized  personnel

authorized to do work on the machine.

4)

Packaging  (boxes,  plastic  bags,  foam

parts and whatever else) must not be left 

around within easy reach of children, due

to the potential danger it represents, nor

be discarded in the environment.

5)

Check  to  see  that  data  on  the  rating

plate  correspond  to  those  of  the  mains

electrical supply to which the machine will

be hooked up.

The  installation  must  be  done  according

to  current  regulations  and  to  the

manufacturer’s instructions, and must be

performed  by  qualified  and  authorized

personnel.  This  machine  should  not  be

installed in kitchens.

Incorrect  installation  may  be  cause  for

injury/damage  to  people,  animals  or

objects, for which the manufacturer shall

not be held responsible.

Safe electrical operation of this device will

be  achieved  only  when  the  connection

to the power outlet has been completed

correctly  and  in  observance  of  current

safety  regulations,  and  particularly  by

grounding  the  unit  very  carefully.  Make

sure  grounding  has  been  done  correctly

as  it  represents  a  fundamental  safety

requirement and, in case of doubt, do not

hesitate to have qualified personnel check

such connection.

Furthermore,  you  must  ensure  that  the

capacity of the available electrical system

is  suitable  for  the  maximum  power

consumption indicated on the rating plate;

make sure also that electrical cables are of

a suitable size.

We  do  not  recommend  using  adapters,

multiple  plugs  and/or  extension  cords.  If

you cannot avoid using them, make sure

that they are exclusively of the kind which 

conforms  to  current  safety  regulations, 

being careful not to exceed the power and 

current ratings indicated on such adapters 

and extension cords.

6) 

This device must be used exclusively for

the functions it has been designed and built

for. Any other application is inappropriate

and  dangerous.  The  manufacturer  shall

not  be  held  responsible  for  any  damage

caused by improper and irrational use.

This  equipment  must  be  installed  to

comply  with  applicable  federal,  state  or

local plumbing codes.

7) 

Using any electrical device requires that

certain fundamental rules be observed.

In particular:

• do not touch the device when you have

wet or humid hands and feet;

• do not use the device without shoes on

your feet;

• do  not  use  extension  cords  in  bath  or

shower rooms;

• do  not  unplug  the  device  from  the

power  outlet  by  pulling  on  the  power

supply cable;

• do not expose the device to atmospheric

agents (rain, sun, etc.);

• do  not  allow  children  or  untrained

people to use this device;

• do  not  clean  the  control  panel  with  a

wet cloth since it is not watertight.

1. General Warnings and Safety Specifications

WARNING

THIS MACHINE IS FOR PROFESSIONAL USE 

ONLY AND SHOULD BE INSTALLED IN LOCA-

TIONS WHERE ITS USE AND MAINTENANCE 

IS RESTRICED TO TRAINED PERSONNEL.  

CHILDREN ARE FORBIDDEN TO OPERATE OR 

PLAY WITH THE MACHINE.

Summary of Contents for Linea
























Reviews: