EN
47
Display
Operating Procedure
Description
Programming Mode
Drain Steam Boiler
• This parameter enables the technician
to enable/disable the steam boiler
draining.
• This parameter allows the service staff
to renew or “regenerate” the water
contained inside the steam boiler,
discharging about one half of the water
contained in the boiler.
Dr a i n s St e a mBo i l
DI SABL ED
When the espresso machine is turned off, press and hold the
button on the group 1 keypad until the
following is displayed (approximately 10 seconds)
Enter the 5 digit technician password using buttons 1-5 on the group 1 keypad. Once accepted the following
appears:
Press the
button on the group 1 keypad until the following appears:
Press the
or the
button to change to
ENABL E
or
DI SABL E
. Once the desired condition is displayed
press ther
button to conirm.
When inished, continue to the next parameter
or press
to exit programming mode.
1
2
4
3
5
• This procedure is recommended in case
the machine should remain inactive for
more than 8 hours and in any case at
least on a weekly basis.
OFF 0 9: 3 0
Pa s s wo r d
? ? ? ? ?
La n g u a g e
ENGLI SH
Dr ai n s St e a mBoi l
DI SABL ED
“Technical” Programming
