EN
22
Accessing Programming Mode
Display
Operating Procedure
1
This is the Barista Level. Press the
button to scroll through the available parameters.
2
When inished, press
to exit programming mode.
3
Press and hold the
button on the group 1 keypad. After approximately 10 seconds the following display
appears.
4
Using a combination of the following buttons (the irst 5 buttons on the group 1 keypad) enter the appropriate
5 digit password.
5
The parameters available after entering the password are dependant upon the password entered.
If a technician password is entered then the technician level parameters will be made available....etc. Press
to scroll through the available parameters.
6
When inished, press
to exit programming mode.
7
L a Ma r z o c c o 0 9: 3 0
Wa t e r Vol u me
Pr o g r a mmi n g
L a Ma r z o c c o 0 9: 3 0
Pa s s wo r d
? ? ? ? ?
L a Ma r z o c c o 0 9: 3 0
Description
• To change any conigurable parameter
the operator must irst enter into the
programming mode.
• There are several levels within the
programming mode that allow the
restriction of speciic parameters
depending upon the password entered.
The three programming levels are as follows:
• Barista Programming
- No password
necessary. Limited parameters are
available.
•
Technical Programming
- Technica password
needed. Barista level parameters plus
additional parameters are available.
Programming Mode
Press and hold the
button on the group 1 keypad. After approximately 5 seconds the following display
appears.
