20
Charger Tabs
Battery Module Tabs
Charger Status – View recent charge cycles for
insight into the health and usage of the battery. If
the charger is used to charge multiple batteries,
the battery ID can be selected. Also available on
this is the ten most recent alarms recorded.
Battery Module Monitoring – Monitors battery
status via a battery module. The monitoring
includes present battery voltage, mid-point voltage,
battery current and battery temperature.
Configuration – View the current configuration of
the charger, including battery type, equalize,
scheduled start, and start delay options. Changes
to these options require Configuration Access.
Battery Module Configuration – Configure battery
module for battery type and ratings as well as set
charge profile types and sequences for a battery
module.
Charge Log – Displays the charge cycle log for
saving to PC. Useful for determining usage trends
and battery health.
BMM Alarm Log – View and save the alarm log
from a BMM battery module.
Alarm Log – Displays all recorded charger and
battery alarms for analysis and saving to PC.
BMM Charge Log – View and save the charge log
from a battery module.
Monitoring – A live display of the present charge
cycle parameters including battery, power module
and alarm status.
BMM Data Log – View and save the data log from a
BMM battery module.
3.8.5 Charge Profile Factory Settings
Charge Profile Name:
Flooded
Charge Profile Type:
IUI
Stage 1 Current:
16A / 100Ah (100%)
Stage 2 Voltage:
2.4 V/C
Stage 3 Current:
4A / 100Ah (25%)
Stage 3 Min dV/dt:
3mV/15min/cell
Stage 3 Max Cell Voltage:
2.7 V/C
Stage 1 Timeout:
390 minutes
Stage 2 Timeout:
330 minutes
Stage 3 Timeout:
0 minutes
EQ/Refresh Current:
1.92A / 100Ah (12%)
EQ/Refresh Duration:
120 minutes
EQ/Refresh Max Voltage:
2.7 V/C
Auto EQ/Refresh After:
30 hours
EQ/Refresh lockout:
4 hours
Auto EQ/Refresh Options**:
None
EQ/Refresh Constant Voltage:
No
Temp Comp factor:
-3mV/degC/cell
Figure 10 – Flooded Lead Acid Cell