(P/N)762.128 Rev B EN 05/10 • © copyright 2009-2010
Kaba Mas LLC
page 6
INSTALLING BATTERIES
The 3035/3125 Entry Device required either a battery box (2788 or 4001), or a battery/alarm box (2789 or
4002) to provide power to the lock.
Mount the battery box inside the safe, and connect the cable coming from the battery box directly into the
connector port marked BAT on the lock.
Small Battery and Battery/Alarm Box:
1. Open safe door.
2. Remove battery box cover by pulling the front portion away from the safe door.
CAUTION!
Hold onto the battery connector to avoid pulling the wires out of the board.
3. Connect a new 9-Volt alkaline battery to the battery connector.
4. Push the battery and the leads completely into the battery compartment.
5. Replace the cover and test the lock several times before closing the door.
Large Battery and Battery/Alarm Box:
1. Open safe door.
2. Remove battery box cover by pulling the front portion away from the safe door.
3. Insert six new “C” cell alkaline batteries
4. Replace the cover and test the lock several times before closing the door.
2788 Small Battery Box or
2789 Small Battery Alarm Box
4001 Large Battery Box
4002 Large Battery Alarm Box
